3E
SPRAYER COMPONENTS & USE INFORMATION, Continued
The backpack strap is provided with
multiple features including shoulder
strap, chest strap, waist belt and lumbar
support. (figure 1). The top the shoulder
strap is attached to the top of the tank
and is removable. The hook from the
lumbar support attaches to the base tube
on the bottom of the tank (figure 2).
INSTALLING THE SHOULDER STRAP
Hook
Chest
Strap
Lumbar
Support
Waist
Belt
Figure 1
Strap Assembly
Base
Tube
Lumbar
Support
Figure 2
Hook Attachment
Shoulder
Strap
WAND ASSEMBLY
1. Make sure the o-ring is installed on the end of the wand. Insert the wand into shut-off valve.
2. Turn and tighten the retaining nut clock-wise onto the shut-off valve.
Retaining
Nut
Wand
O-ring
Shut-off
Valve
INSTALLING THE PUMP HANDLE
The pump handle can be mounted on either side of the pump shaft
(A). To install the pump handle place the handle (C) over the shaft (A)
aligning the pump handle hole and shaft hole. Slide the bolt (B) through
the aligned hole as shown in figure 3. Tighten nut (D) to bolt. There are
holes in the pump handle to allow for either left (fig.2-4) or right (fig.5)
hand mounting.
Figure 1
Figure 2
Line up holes
Figure 3
Slide bolt through holes
Figure 5
Right Hand
Figure 4
Tighten nut to bolt
Threaded Bolt
Nylon Lock Nut
A. Pump Shaft
B. Bolt
C. Pump Handle
D. Nut
Pump Handle
Pump Shaft
