Chaparral FS1310, Руководство пользователя

Страница: 41 / 96

Configuring the Router
3-13
4
Select the SCSI ID (Initiator ID) you want to use for this channel and press Enter .
Depending the model you have, other screens may display.
The system confirms that you want to make the change.
5
Select Yes and press Enter to make the changes.
The system confirms that the changes are made.
6
Press Enter to return to the Configuration Menu.
Disabling the Termination on an HVD Router
You can disable the router’s termination on the HVD model only; the termination on the
LVD model cannot be disabled. You would only want to disable termination if the router is
located in the middle of a SCSI bus.
To disable the termination:
1
From the System Menu, select Configuration Menu and press Enter .
The Configuration Menu screen displays.
2
Select Channel Configuration and press Enter .
The Channel Configuration screen displays.
3
Select the channel you want to change and press Enter .
You may need to change initiator IDs depending on the requirements of the device.
4
Select Termination and press Enter .
The Termination screen displays.
5
Select OFF and press Enter .
The system confirms that you want to make the change.
6
Select Yes and press Enter to turn termination off.
The system confirms that the change is made.
7
Press Enter to return to the Configuration Menu.