Chandler Engineering AMETEK 7200, Инструкция по эксплуатации

Страница: 40 / 77

3-2 SECTION 3 - MAINTENANCE
Suggested Maintenance Schedule
1. As previously mentioned, change the seals as often as necessary, based upon experience
with the instrument. This frequency will mostly depend upon the temperature and
pressure conditions at which the instrument is operated.
2. As previously mentioned, use a new diaphragm (Item 6 on the #7200-1010 CHA Vessel
assembly drawing) for each test.
3. As mentioned in the System Shut-down and Post-test Cleanup portion of previous
Section 2 (Operating Instructions), check after each test for any cement which may have
plugged or restricted any tubing or filters, and clean or replace parts as necessary.
4. No other periodic maintenance should be necessary.