Chapter 15. Open Sound Control (OSC)
Software version 6.0 onwards for QuickQ consoles supports Open Sound Control (OSC) from
3rd party control systems over a network such as the Touch OSC application for iOS/Android
devices.
Enable
Open Sound Control
in the Network Settings Window on the console, QuickQ is hard
coded to TX on port 9000 and RX on port 8000. Port number is fixed and cannot be changed.
Supported Open Sound Control commands are:
Table 1. Supported OSC Commands
Command
Arguments
OSC Action
/pb/
<playback>
float between 0.0 and 1.0
or
int between 0
and 100
Set playback fader
level
/pb/
<playback>
/go
(optional) non-zero value
Go on playback
/pb/
<playback>
/flash
0 sets to 0%
non-zero sets to 100%
Set playback level to
100%
/pb/
<playback>
/pause
(optional) non-zero value
Pause playback
/pb/
<playback>
/releas
e
(optional) non-zero value
Release playback
/pb/
<playback>
/
<cue>
(optional) non-zero value
Jump to cue
/10scene/<item>/<zone
>
/10scene/<item>
(optional) one of following
no arguments
- activate button
0
- release button
1
- activate button
Control 10Scene
buttons
/feedback/off
None
Turns feedback off
/feedback/pb
/feedback/exec
/feedback/pb+exec
None
Turns feedback on
and transmits state of
playbacks and
executes
Open Sound Control must be enabled in
Settings
›
Network
›
Protocols
for
these commands to work.
2021-03-12
QuickQ v6
57
