EN
4
Massage Control Operation
1. There is a hand-held controller for ease of operation. The controller can be stored in the side
pocket when not in use.
Back Massager / Heat
1. Sit on the Massager and rest against the Back Massager.
2. When you are comfortable, press the “POWER” button once and the indicator light will illumina-
te. (Note: Press the “POWER” button again to turn off).
Full Back Massage
1.
Press the “FULL” button. The indicator light illuminates, and the rotating massage fingers start
to rotate. At the same time, they will travel the full height of the seat back, pause for a second,
the rotating massage fingers will reverse rotation direction, and will then travel all the way down
again. The process repeats up and down the full length of the seat back.
2. If heat is required while massaging, press the “HEAT” button. The indicator light illuminates,
and the rotating massage fingers will glow red and start to warm up.
3.
To stop the massage fingers rotating at a particular spot, so as to apply heat in one particular
area, press the “FULL” button when it reaches your desired position and then ensure the Heat
function has been turned on.
4.
To turn the whole appliance off, press the “POWER” button. The rotating massage fingers will
return to the bottom of the seat back and then stop.
Upper Back Massage
1. To massage just the upper part of your back, press the “UPPER” button. The indicator light
illuminates, and the rotating massage fingers will move to the upper section of the seat back.
2.
The rotating massage fingers will then only travel up and down the upper section of the seat
back, pause for a second, reverse rotation direction, and will then travel halfway down again.
The process repeats up and down the upper section of the seat back.
3.
To stop the massage fingers rotating at a particular spot, so as to apply heat in one particular
area, press the “UPPER” button when it reaches your desired position and then ensure the
Heat function has been turned on.
Lower Back Massage
1. To massage just the lower part of your back, press the “LOWER” button. The indicator light
illuminates, and the rotating massage fingers will move to the lower section of the seat back.
2.
The rotating massage fingers will then only travel up and down the lower section of the seat
back, pause for a second, reverse rotation direction, and will then travel halfway up again. The
process repeats up and down the lower section of the seat back.
3.
To stop the massage fingers rotating at a particular spot, so as to apply heat in one particular
area, press the “LOWER” button when it reaches your desired position and then ensure the
Heat function has been turned on.
4. After approximately 15 minutes, the unit will automatically turn off.
Thigh Massager
1. The seat has a vibrating massager inbuilt to massage your buttocks and thighs. To start the
vibrating seat massager, press the “SEAT” button. The vibration will start on low and the “L”
indicator light will illuminate.