12
RIGGING TECHNIQUES
Self Recovery
Locate a suitable anchor such as a strong tree trunk or boulder.
Always use a sling as an anchor point.
CAUTION- Do not attaches
the clevis hook back onto the cable as this could cause damage to the
cable.
As shown in Fig 3.1
Your winch is equipped with a roller fairlead to help guide the wire rope
and to reduce binding on short side pulls. Do not winch from an
acute angle as the wire rope will pile up on one side of the drum
causing damage to wire rope and the winch. Fig 3.2
Short pulls from an angle can be used to straighten the vehicle. Long
pulls should be done with the wire rope at a 90° angle to the
winch/vehicle.
When pulling a heavy load, place a blanket or jacket over the wire rope
five or six feet from the hook. In the event of a broken cable it will
dampen the snap back. For additional protection open the hood of the
vehicle as shown in Fig 3.3.
For pulls over 5,000lbs., we recommend the use of the snatch
block/pulley block to double line the wire rope. Fig 3.4.
This reduces the load on the winch and the strain on the rope by
approximately 50%.
WARNING - Never use your winch for overhead hoisting or for
lifting people or moving people.
Fig 3.1
Fig 3.2
Fig 3.3
Fig 3.4
Fig 3 5
Содержание C80195
Страница 1: ......
Страница 8: ...7 Fig 3 Fig 4 Fig 5 Fig 6 Fig 7 Fig 8 Fig 9...
Страница 31: ...30 Fig 3 Fig 4 Fig 5 Fig 6 Fig 7 Fig 8 Fig 9...