background image

LIGHT 

LIGHT 

LIGHT 

FEATURES 

For use with any SECURITY

® 

garage door openers having an 

orange “learn” button.

Personalized Password: 

Up to 10,000 possible combinations.

Password can be easily changed if desired.

Temporary Password: 

Can be added for visitors or service

persons. This temporary password can be limited to a
programmable number of hours or a programmable number of
entries.

Rolling Code: 

While your password remains constant until you

change it, the code between the Keyless Entry and the receiver
changes with each use, randomly accessing over 100 billion
new codes.

Operation: 

Opener activates when 4-digit password and Enter

button is pressed.

If wrong numbers are accidentally pressed, correction can be
made immediately. The Enter button will transmit only the last
four digits.

The Keypad will blink for 15 seconds after the password is
transmitted. During that time the Enter button can be used to
stop or reverse the door travel.

SETTING THE PERSONAL ENTRY PASSWORD 

Model 976LM & 976LMC Security

® 

Wireless Keyless Entry 

WARNING 

To prevent possible SERIOUS INJURY or DEATH from a moving
gate or garage door:
• Install door control within sight of gate or garage door, out of

reach of children at a minimum height of 5 feet (1.5 m), and away
from ALL moving parts of gate or door.

• NEVER permit children to operate or play with gate or door control

push buttons or remote control transmitters.

• Activate gate or door ONLY when it can be seen clearly, is properly 

adjusted, and there are no obstructions to door travel.

• ALWAYS keep gate or garage door in sight until completely closed.

NEVER permit anyone to cross path of moving gate or closing
garage door.

NOTICE: To comply with FCC and or Industry Canada (IC) rules, adjustment or modifications of 
this receiver and/or transmitter are prohibited, except for changing the code setting or replacing 
the battery. THERE ARE NO OTHER USER SERVICEABLE PARTS. 
Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. Operation is subject to the 
following two conditions: (1) this device may not cause harmful interference, and (2) this device 
must accept any interference received, including interference that may cause undesired operation. 

We recommend that you program your password now, before you install the Keyless Entry. Then you can test the reception 
at the mounting location before you proceed further. 

USING THE MULTI-FUNCTION DOOR CONTROL 

USING THE “LEARN” BUTTON 

KG 

KG 

LOCK 

1. Enter a four digit personal identification 

number (PIN) of your choice on the keypad. 
Then press and hold ENTER. 

2. While holding the ENTER button, press and 

hold the LIGHT button on the Multi-Function 
Door Control. 

LOCK 

1. Press and release the “learn” button on motor 

unit. The learn indicator light will glow 
steadily for 30 seconds. 

2. Within 30 seconds, enter a four digit personal 

identification number (PIN) of your choice on 
the keypad. Then press and hold the ENTER 
button. 

3. Continue holding the ENTER and LIGHT 

buttons while you press the push bar on the 

3. Release the button when the motor unit lights 

Multi-Function Door Control (all three buttons 

blink. It has learned the code. If light bulbs 

are held). 

LOCK 

are not installed, two clicks will be heard. 

4. Release buttons when the motor unit lights 

blink. It has learned the code. If light bulbs 
are not installed, two clicks will be heard. 

Side two contains instructions for installing the Keyless 
Entry, changing the personal entry password and setting 
a temporary password. 

Отзывы: