![Challenger MT835C Скачать руководство пользователя страница 9](http://html1.mh-extra.com/html/challenger/mt835c/mt835c_service-manual_2586297009.webp)
79033095 C Rev.
1-5
Introduction
GENERAL HAZARD INFORMATION
FIG. 5:
When engine is running and steering wheel is
turned, machine will not turn with transmission control
lever in PARK position.
IMPORTANT: Ensure all personnel are a safe distance
from machine before turning steering wheel.
Do not start engine until area is free of personnel to avoid
personal injury due to unexpected machine movement.
Unless instructed otherwise, perform maintenance under
the following conditions:
•
Machine is parked on level ground.
•
Implements are lowered to ground.
•
Transmission control lever is in PARK position.
•
Engine is stopped.
•
Engine start switch is turned off and switch key is
removed.
•
Machine has cooled down.
•
Steering cylinder lock is in place.
m
WARNING: Do not start engine until area is
free of personnel to avoid personal injury
due to unexpected machine movement.
Know width of machine to maintain proper clearance
when operating machine near fences or boundary
obstacles.
Wear a hard hat, protective glasses and other protective
equipment, as required.
Wearing loose clothing or not using correct safety
equipment for job, injury can occur. Never wear clothing
that will catch on objects. Extra safety equipment that can
be required includes hard hat, safety shoes, ear
protection, eye or face protection, heavy gloves and
reflective clothing.
Make sure all protective guards and covers are secured
on machine.
Keep machine free from foreign material. Remove debris,
oil, tools and other items from deck, walkways and steps.
Secure lunch boxes, tools and other loose items not a
part of machine.
Know appropriate work site hand signals and personnel
authorized to give hand signals. Accept hand signals from
one person only.
Hydraulic oil or diesel fuel leaking under pressure can
penetrate skin and cause infection or other injury.
To prevent personal injury relieve all pressure before
disconnecting fluid lines. Before applying pressure, make
sure all connections are tight and components are in good
condition. Do not use hand to check for suspected leaks
under pressure. Use a piece of cardboard or wood for this
purpose. If injured by leaking fluid, see a doctor
immediately.
FIG. 5
P111203001
Find manuals at http://best-manuals.com/search?&s=CHAL-79033095