Introduction
1-12
79033095 C Rev.
Rollover Protective Structure (ROPS)
Do not make any modifications to ROPS as this affects
protection provided. Do not alter structure by welding,
cutting, adding weight or drilling holes into structure.
Any alteration not specifically authorized by AGCO
invalidates AGCO certification for ROPS. Protection
offered by ROPS will be impaired if ROPS has structural
damage. Damage to structure can be caused by an
overturn or by falling objects.
Do not mount items (fire extinguishers, first aid kits, work
lights, etc.) by welding any brackets to ROPS or by drilling
holes in ROPS. See dealer for mounting guidelines.
Burn Hazards
FIG. 16:
Do not touch any part of an operating engine.
Other components such as transmission, axles and oil
reservoir may be hot. Allow engine to cool before any
maintenance is performed. Relieve all pressure in air, oil,
lubrication, fuel system or cooling system before any line,
fittings or related items are disconnected.
Coolant Precautions
FIG. 17:
When engine is at operating temperature,
engine coolant is hot and under pressure. Radiator and all
lines to heaters or engine contain hot coolant.
Any contact with hot coolant or steam can cause severe
burns. Allow cooling system components to cool before
cooling system is drained.
Check coolant level only after engine has been stopped.
Cooling system conditioner contains alkali that can cause
personal injury.
Do not allow alkali to contact skin, eyes or mouth. Do not
remove radiator cap if engine is hot. Only remove cap
when it is cool enough to touch with bare hands. Loosen
cap slowly to first notch to relieve pressure, then remove
cap.
FIG. 16
N020903016
FIG. 17
N020903017
Find manuals at http://best-manuals.com/search?&s=CHAL-79033095
