79033095 C Rev.
1-9
Introduction
When possible, operate machine up and down slopes.
Avoid operating machine across slope, when possible.
Keep machine under control. Do not overload machine
beyond capacity.
Make sure towing devices are adequate for application.
Make sure components on three-point hitch are adequate
for application.
Connect trailing equipment only to a drawbar or hitch.
Never straddle a wire cable. Never allow other personnel
to straddle a wire cable.
When maneuvering to connect equipment, make sure no
personnel are between machine and trailing equipment.
Block up hitch of trailing equipment to align equipment
with drawbar.
Know maximum dimensions of machine.
When operating on icy roads, reduce travel speed.
After operating in muddy conditions, allow sufficient time
for belts to reject debris and moisture before making high
speed maneuvers. Belts that are wet and/or muddy may
impede machine’s steering.
If stability of machine is noticeably reduced, reduce travel
speed.
Select a gear that will control machine speed when
descending a hill.
Downshift if braking is required to control machine speed.
Never coast down a hill with transmission in NEUTRAL.
Do not steer machine when crossing ditches. Ditches that
are wide and/or deep may allow guide blocks to sag
below midwheels, causing belt to come off.
Operator Station
Any modifications to inside of operator station should not
project into operator space. The addition of a radio, fire
extinguisher and other equipment must be installed so
defined operator space is maintained.
Any item brought into cab should not project into defined
operator space. A lunch box or other loose items must be
secured. Objects must not pose an impact hazard in
rough terrain or a rollover.
Find manuals at http://best-manuals.com/search?&s=CHAL-79033095
