Model DX77
Installation, Operation and Maintenance
Page
11
Rev 06/17/2020
DX77-IOM-A.doc
O
PERATION
P
ROCEDURE
S
AFETY
N
OTICES AND
D
ECALS
This product is furnished with graphic safety
warning labels, which are reproduced on page 3 of
these instructions. Do not remove or deface these
warning labels, or allow them to be removed or
defaced. For your safety, and the safety of others,
read and understand all of the safety notices and
decals included.
O
WNER
/E
MPLOYER
R
ESPONSIBILITIES
This lift has been designed and constructed according to
ANSI/ALI ALCTV-2011 standard. The standard applies to
lift manufactures, as well as to owners and employers. The
owner/employer’s responsibilities as prescribed by
ANSI/ALI ALOIM-2008, are summarized below. For exact
wording refer to the actual standard provided with this
manual in the literature pack.
The Owner/Employer shall
insure that lift operators
are qualified and that they are trained in the safe use
and operation of the lift using the manufacturer’s
operating instructions; ALI/SM 93 -1, ALI Lifting it
Right safety manual; ALI/ST-90 ALI Safety Tips card;
ANSI/ALI ALOIM-2008, American National Standard
for Automotive Lifts-Safety Requirements for
Operation, Inspection and Maintenance; ALI/WL
Series, ALI Uniform Warning Label Decals/Placards;
and in case of frame engaging lifts, ALI/LP-GUIDE,
Vehicle Lifting Points/Quick Reference Guide for
Frame Engaging Lifts.
The Owner/Employer shall
establish procedures to
periodically inspect the lift in accordance with the lift
manufacturer’s instructions or ANSI/ALI ALOIM-2008,
American National Standard for Automotive Lifts-
Safety Requirements for Operation, Inspection and
Maintenance; and the employer shall insure that the
lift inspectors are qualified and that they are
adequately trained in the inspection of the lift.
The Owner/Employer shall
establish procedures to
periodically maintain the lift in accordance with the lift
manufacturer’s instructions or ANSI/ALIOIM-2008,
American National Standard for Automotive Lifts-
Safety Requirements for Operation, Inspection and
Maintenance; and the employer shall insure that the
lift maintenance personnel are qualified and that they
are adequately trained in the maintenance of the lift.
The Owner/Employer shall
maintain the periodic
inspection and maintenance records recommended
by the manufacturer or ANSI/ALI ALOIM-2008,
American National Standard for Automotive Lifts-
Safety Requirements for Operation, Inspection and
Maintenance.
The Owner/Employer shall
display the lift
manufacturer’s operating instructions; ALI/SM 93 -1,
ALI Lifting it Right safety manual; ALI/ST-90 ALI
Safety Tips card; ANSI/ALI ALOIM-2008, American
National Standard for Automotive Lifts-Safety
Requirements for Operation, Inspection and
Maintenance; and in the case of frame engaging lift,
ALI/LP-GUIDE, Vehicle Lifting Points/Quick
Reference Guide for Frame Engaging Lifts; in a
conspicuous location in the lift area convenient to the
operator.
IMPORTANT
SAFETY
INSTRUCTIONS
When using your garage equipment, basic safety
precautions should always be followed, including the
following:
1. Read all instructions.
2. Care must be taken as burns can occur from
touching hot parts.
3. To reduce the risk of fire, do not operate
equipment in the vicinity of open containers of
flammable liquids (gasoline).
4. Keep hair, loose clothing, fingers, and all parts
of body away from moving parts.
5. Use only as described in this manual. Use only
manufacturer’s recommended attachments.
6.
ALWAYS WEAR SAFETY GLASSES.
Everyday eyeglasses only have impact resistant
lenses, they are not safety glasses.
SAVE THESE INSTRUCTIONS
