Disassembly and Cleaning of the Press
Chamber
Turn off the power first, unplug the power plug, and put on heat-resistant
gloves. Use a wrench to loosen the screw first, remove the squeeze
chamber, remove the squeeze pin, and wipe with paper or cloth. The
removed squeeze chamber can be rinsed with water and detergent. Do not
use acid, alkali, soda, saline, or abrasive materials (such as toothpaste,
etc.) for cleaning. The more the water content of the raw material, the
tighter the slag of the raw material sticks to the screw and the more
difficult it is to wash, so it can be scraped off with a knife. Except for the
press chamber, it is strictly forbidden to enter water or any liquid in other
parts of the machine. After cleaning, the squeeze chamber must be wiped
with water immediately or dried with an electric hair dryer before it can
be stored, otherwise the raw materials will stick to the screw due to the
presence of water and produce a metallic friction sound.
Содержание CZR2014
Страница 6: ... The steps of oil extraction are from to in the figure above ...
Страница 24: ......