CG CDN40-012-65 Скачать руководство пользователя страница 9

Страница: 9 / 72

Safety instructions

General safety and application notes

CG Drives & Automation

Safety instructions

2.1

General safety and application notes for Emotron CDN drives

(in accordance with Low−Voltage Directive

2014/35/EU)

For your personal safety
Disregarding the following safety measures can lead to severe injury to persons and

damage to material assets:



Only use the product as directed.



Never commission the product in the event of visible damage.



Never commission the product before assembly has been completed.



Do not carry out any technical changes on the product.



Only use the accessories approved for the product.



Only use original spare parts from CG.



Observe all regulations for the prevention of accidents, directives and laws

applicable on site.



Transport, installation, commissioning and maintenance work must only be carried

out by qualified personnel.

–

Observe IEC 364 and CENELEC HD 384 or DIN VDE 0100 and IEC report 664 or

DIN VDE 0110 and all national regulations for the prevention of accidents.

–

According to this basic safety information, qualified, skilled personnel are persons

who are familiar with the assembly, installation, commissioning, and operation of

the product and who have the qualifications necessary for their occupation.



Observe all specifications in this documentation.

–

This is the condition for safe and

trouble−free

operation and the achievement of

the specified product features.

–

The procedural notes and circuit details described in this documentation are only

proposals. It’s up to the user to check whether they can be transferred to the

particular applications. CG does not accept any liability for the suitability of the

procedures and circuit proposals described.



Depending on their degree of protection, some parts of the Emotron CDN drives

and their accessory components can be live during operation. Surfaces can be hot.

–

Non−authorised

removal of the required cover, inappropriate use, incorrect

installation or operation, creates the risk of severe injury to persons or damage to

material assets.

–

For more information, please see the documentation.



High amounts of energy are produced in the drive. Therefore it is required to wear

personal protective equipment (body protection, headgear, eye protection, ear

protection, hand guard).

Содержание CDN40-012-65









































































Результаты поиска

Содержание CDN40-012-65

Отзывы:

Похожие инструкции для CDN40-012-65

Бренды по названию

Популярные бренды

CG CDN40-012-65, Руководство по оборудованию

Результаты поиска

Содержание CDN40-012-65

Отзывы:

Похожие инструкции для CDN40-012-65

Бренды по названию

Популярные бренды