MAINTENANCE & LUBRICATION
151
License plate lamp replacement
If the license plate lamp has failed:
1. Pull the lamp holder from the rear of the license plate lamp housing.
2. Pull the failed bulb and replace it with a new bulb.
3. Reinstall the lamp holder into the rear of the license plate lamp housing.
4. Bulb Specification:
12V 5W W5W
CAUTION
Hot surface. Touch the bulb only after it has cooled down.
Fuses and relays
The main relays and fuses are locate
d under the front access cover. If a fuse is blown, turn off the main
switch and install a new fuse of the specified amperage. Turn on the main switch. If the fuse immediately
blows again, consult your dealer. For relay replacement, consult your dealer.
CAUTION
To prevent an accidental short-circuit, turn off the main switch when checking or replacing fuses. Always
use a fuse with the correct specified rating. Never use conductive material in place of the proper fuse.