CF MOTO CF1000ATR 2018, Руководство по обслуживанию, Страница: 264 / 365

5.9 Electrical System
05-189
5.9.1 Charging System
5.9.1.1 Charging Wire Diagram
0518901
5.9.1.2 Magneto Coil Resistance
● Measure 3-phase magneto stator coil
resistance.
● If resistance is out of specification,
replace with a new stator coil.
● Check for the insulation between stator
coil and stator core.
Turn multimeter to 1×10Ω
Magneto Coil Resistance:
0.5Ω~1.5Ω (Yellow-Yellow)
Resistance between Stator Coil and Core:
∞Ω (Yellow- Ground)
5.9.1.3 Magneto with Non-loaded
● Start the engine and run it at 5000r/min.
Use multimeter to measure the voltage
between 3 output lines.
● If the reading is below the specification,
replace with a new magneto.
Turn Multimeter to V(AC)
Voltage between output lines when MAG
Non-loaded:
>50V(AC) at 5000r/min
0518902
Measure resistance
Measure voltage
0518903
1
2
3
4
5 6
1 Magneto 3 Voltage regulator 5 Battery
2 Regulator 4 Fuse 6 Load