CF MOTO 300NK, Руководство пользователя, Страница: 117 / 155

MAINTENANCE
117
Drive Chain Inspection
The drive chain slack and lubrication must be checked daily before riding in accordance with the Periodic
Maintenance Chart for safety and preventing excessive wear� If the chain becomes badly worn or
maladjusted, it will lead excessive component wear and possible failure�
If the chain is too tight, will accelerate the wear for chain, sprocket, rear sprocket and rear rim� Some parts
may crack or break when placed under a load�
If the chain is too loose, The chain may fall off from sprocket or rear sprocket, which may cause locking of
rear wheel or engine damage�
The service life of the drive chain largely depends on the maintenance�
Chain dirt inspection
Inspect periodically or inspect the chain for dirt ingress, or after driving in severe conditions�
If the chain is dirty, flush any large dirt particles with a soft jet of water. Clean any residual dirt and residual
lubricant with a proper chain cleaner�
Spray the chain with a proper chain lubricant after the chain is dry�
WARNING
When spraying chain lubricant, do not splash the lubricant onto other parts� Lubricant on the tires will
decrease the tire grip, and lubricant on the brake discs will decrease the brake performance� Clean these
components with a proper cleaner if over-spray occurs�