Ceyear 4456 Series, Руководство пользователя

Страница: 84 / 267

Chapter X System Configuration
74
The [Current Port] option of the menu will display the current port. Click [Select Port] menu key and then rotate
the Multipurpose to change the port value. When it is set to the required port, click [OK/Set Port] menu key and
set the system port, and it will be displayed on [Current Port] option of the menu after the setup succeeds.
10.4 Options
The software optional module of this oscilloscope includes the limit/mask test, power measurement and analysis,
HD video trigger, I2C trigger and analysis, RS232 trigger and analysis, SPI trigger and analysis, CAN trigger and
analysis, LIN trigger and analysis, FlexRay trigger and analysis, Audio trigger and analysis, USB trigger and
analysis and 1553 trigger and analysis.
Click [Optional Module] menu key to open the Optional Module menu:
Fig. 10.7 Optional Module Menu
Click [Enabled Module] menu key, and the list of the enabled module in the oscilloscope will be displayed.
Click [Add Module] menu key, and the list of the add module will be displayed. Click the option to be added, and
then enter the registration code in the popup registration window.
[Factory ID] menu key shows the factory ID of this instrument.
10.5 Calibration
This oscilloscope can automatically complete the channel calibration.
Click [Calibration] menu key, and open the menu:
Fig. 10.8 Calibration Menu