Chapter X System Configuration
72
Ink Saver
: The Ink Saver can be set on or off. With Ink Saver Off, the color of the printed screen image is the
same as the currently displayed color. With Ink Saver On, the screen image will be inverted before printing.
Fan Speed
: Fan Speed can be set low or high. It can be selected low or high speed based current temperature.
About
: Click this button, the information of this production can be showed.
Exit
: Click this button, and exit the application.
10.2
Reference&AUX OUT
Click [Reference&AUX OUT] menu key, and open the setup menu:
Fig. 10.3 Reference&AUX OUT Menu
Ref. Source
: The 10M Ref. Source clock source can be selected. The Int. and Ext. clock source can be selected.
Ref OUT
: When the Int. is selected for the 10M Ref. Source, the Ref OUT can be enabled.
AUX OUT: When the AUX OUT is selected, it can be set to test signal, trigger output and limit/mask output.
Main Trigger: One pulse will be output when there is a trigger during the internal acquire.
Limit/mask output: The pulse will be output when the limit/mask test fails or when it is completed.
Test signal: The required signal output can be selected through [Waveform Type] menu key. The
optional analog signal waveforms include sine wave, sine wave with noise, sine wave with glitch,
modulation signal with 10 kHz fundamental frequency, uniform frequency modulation wave, harmonic
distortion signal, 1 kHz square wave with sinusoidal noise coupling, ramp wave, sawtooth wave, runt
pulse, non-monotonic edge pulse, RF signal, and analog and digital signal. The optional digital signal
waveform includes square wave, repetitive pulse, single-shot pulse, clock with infrequent glitch, edge
transition & setup&hold signal, digital burst signal, digital burst signal with rare glitch, DC motor,
RS232, CAN, LIN and FlexRay.
Note: When selecting
“
Single-shot Pulse
”
, one pulse will be output every time after [Send Pulse] menu key is
clicked.
Содержание 4456 Series
