Ceyear 4456 Series, Руководство пользователя

Страница: 169 / 267

Chapter XII Limit/Mask Test (Option)
159
Source: The analog channel for executing the mask test.
Violation Threshold: When the violation count reaches the Violation Threshold, the test will fail. The Violation
Threshold setting range is: 1

1,000,000,

.
Stop After: It means the test stop condition, and Waveforms or Time can be selected.
Waveforms/Time: Set the waveforms or test time when the test stops. The waveforms setting range is: 1

1,000,000,

, and the time setting range is: 1 s

48 h,

.
Action on Failure: Select the action when the test fails, and None, Stop Acquire, Save Waveforms, Save Screen
and AUX OUT can be selected. When selecting Save Waveforms or Save Screen, external USB shall be
connected.
Action on Test Completion: Select the action when the test is completed, and None and AUX OUT can be
selected.
Pre-Test Delay: Set the delay time before the test, and the settable scope is 0 s

200 s.
Repeat on Completion: The function of restarting the test after on/off test is completed.
12.4 Run Test
Click [Run Test] menu key to enable and disable the limit/mask test.
12.5 Show Results
Click [Show Results] menu key, and the Show Results selection menu will pop up on the right side of the screen:
Fig. 12.8 Show Results Menu
Click the corresponding option button to display the result. When selecting
“
Show Detailed Results
”
, the test data
of each segment of mask will be displayed in the Show Results window.