Ceyear 4456 Series, Руководство пользователя

Страница: 139 / 267

Chapter XI Protocol Analyzer (Option)
129
Click [Header Field] menu key and set the FlexRay protocol trigger type to Header Field, and the menu at the
bottom of the screen will be switched to the Header Field Trigger Type setup menu:
Fig. 11.163 FlexRay Header Field Trigger Level1 Menu
Click [Header Field] menu key, and the Header Field setup menu will pop up on the right side of the screen:
Fig. 11.164 FlexRay Header Field Trigger Level2 Menu
Click [Indicator Bits], [Identifier], [Payload Length], [Header CRC] and [Cycle Count] keys of the menu, and the
Indicator Bits, Identifier, Payload Length, Header CRC and Cycle Count setup keypad will pop up respectively.
As the setting method is the same as above, it will be omitted here.
Fig. 11.165 FlexRay Trigger and Analysis Example
11.7 AUDIO trigger and analysis
The Audio bus is composed of the bit clock, bit select and data, which can be triggered on word select, frame sync,