Ceyear 1465 Series, Руководство по программированию

Страница: 82 / 143

3 SCPI
3.3 Instrument subsystem command
75
Example: :FM:INTernal:NOISe GAUS FM noise is set as Gauss.
Reset status: UNIF
Key Entry:
【 FM/ΦM 】 —>[Basic Config]—>[FM Waveform]—>[Noise]
[:SOURce]:FM:INTernal:RAMP <Mode>
Function: This command is used for setting signal output types when FM Waveform is set to Zigzag,
which includes: Zigzag-up and Zigzag-down. For FM signal output waveform, see the
command ―
:FM:INTernal:SHAPe
‖.
Setting format: [:SOURce]:FM:INTernal:RAMP POSitive|NEGative
Query format: [:SOURce]:FM:INTernal:RAMP?
Parameter:
<Mode> Discrete data. Options for signal output type when FM Waveform is set to Zigzag:
POSitive Zigzag-up,
NEGative Zigzag-down.
Example: :FM:INTernal:RAMP NEG FM Zigzag waveform is set as Zigzag-up.
Reset status: POS
Key Entry:
【 FM/ΦM 】 —>[Basic Config]—>[FM Waveform]—>[Zigzag]
[:SOURce]:FM:INTernal:SHAPe <Mode>
Function: This command is used for setting FM signal output waveform, which includes: Sinc,
Square, Triangle, Zigzag, White noise, SweepSinc, and DualSinc.
Setting format: [:SOURce]:FM:INTernal:SHAPe SINE|SQUare|TRIangle|RAMP
|NOISe|SWEPtsine|DUALsine
Query format: [:SOURce]:FM:INTernal:SHAPe?
Parameter:
<Mode> Discrete data. Options for FM output waveform are:
SINE Sine,
SQUare Square,
TRIangle Triangle,
RAMP Zigzag,
NOISe Noise,
SWEPtsine SweepSinc,
DUALsine DualSinc.
Example: [:SOURce]:FM:INTernal:SHAP RAMP FM waveform is zigzag.
Reset status: SINE
Key Entry:
【
FM/ΦM
】
—>[Basic Config]—>[FM Waveform]
[:SOURce]:FM:INTernal:SWEep:TIME <Time>
Function: This command is used for setting sweep time when FM Waveform is set to SweepSinc.
Setting format: [:SOURce]:FM:INTernal:SWEep:TIME <val>
Query format: [:SOURce]:FM:INTernal:SWEep:TIME?
Parameter: