CET PMC-1304-3, Руководство пользователя

Страница: 18 / 51

Ceiec Electric Technology
18
Chapter 4 Configuring the PMC-1304-3 via the Web Console
This section gives corresponding Web operations for the T Model and RTU Model.

For the T Model, there is only On-line Web Console that can be used to configure a
PMC-1304-3-T.

For the RTU Model, PMC-1304-3-R Web Console has two programming modes: On-Line and
Off-Line. The On-Line mode is used to query and configure a connected PMC-1304-3-R, while
the Off-Line mode is used to configure most of parameters for a PMC-1304-3-R without physically
connecting to the PMC-1304-3-R.
Web Console Menus and Models:

Available
4.1 On-line Web Console Login
1) Open your Internet Explorer with the scripting function enabled. To enable scripting for your
browser, right click on your Internet Explorer icon and select Properties from the pop-up dialog box.
The Internet Options window appears. Select the Security tab and then click on the Custom Level
button near the bottom of the window. The Security Settings window appears. Enable the three
options as shown below and then click OK .
Menus PMC-1304-3 Models
1
st
level 2
nd
level T RTU
Device Settings
Network
 
Time

FTP Password

Channel Management
Channel Settings

Slave IED Management

Driver Management

Modbus Gateway
 
Serial Port

Data Cache Management
Cache Management

Data Cache

System Maintenance
Password Setup
 
Statistic

Clear History

Backup/Restore
 
System Information
 
Reboot
 