*
C
E
T
i
s
a
t
ra
d
e
m
a
rk
o
f
C
E
T
F
ir
e
P
u
m
p
s
M
fg
L
td
.
75 Hector St., P.O. Box 90, Pierreville (Québec) Canada J0G 1J0 Telephone: 1-800-567-2719 Fax: 1-800-434-2613
www.fire-pump.com
ACCEPT ONLY THE BEST
A C E N T U R Y O F E N G I N E E R I N G F O R T H E B R A V E S T
PFP-6hpHND-EM-Twin
INSTRUCTIONS MANUAL
Congratulation, you have just purchased a C.E.T. portable pump. If you follow the procedures in this
operation manual, it will give you years of use without any problems.
ENGINE SPECIFICATIONS
• Honda 6.5hp at 3600 RPM GX200, air cooled engine.
• Single cylinder gasoline engine.
• 12V electric start with recoil start as backup.
• 1.5 gallon (5.7 l) integrated fuel tank.
PUMP UNIT SPECIFICATIONS
• C.E.T. dual stage centrifugal pump.
• Pump body made from aluminum.
• Aluminum impeller.
• Mechanical shaft seal.
• Self-priming system.
• Two 1” (25 mm) delivery outlets and one 1 1/2” (38mm) NPSH delivery outlet.
• One 1 1/2 ” (38 mm) NPSH suction inlet.
• Dimensions(approx..) : Length : 19” (483 mm); Width : 17” (406 mm); Height : 16” (381 mm).
• Weight (approx.) : 60 lbs (27 kg).
INCLUDED ACCESSORIES
• Low oil alert.
• 36 watts alternator
PERFORMANCE
70 GPM (266 LPM) @ 10 PSI (0.7 bar)
40 GPM (151 LPM) @ 100 PSI (6.9 bar)
20 GPM (76 LPM) @ 125 PSI (8.6 bar)
Your pump comes with a full year warranty on all mechanical components.
DOS AND DONTS
Do…
• Read your Honda owner’s manual
• Close your drain valve on the pump casing before starting the engine
• Seal up any air that could leak into the suction side
• Stop your pump before fuelling
Do Not…
• Let your pump freeze up with water in it (drain the casing)
• Allow sand in the suction, it will damage the wear ring and the mechanical seal (use floating strainer if water supply doubtful)
• Run your pump dry for more than 2 minutes at idle (prime as soon as possible)
• Use your pump with less than 12 in of water below the inlet of the suction hose
• Allow your pump to run without surveillance
• Run the pump with the discharge closed for more than 1 minute