CET iMeter 6, Руководство пользователя

Страница: 110 / 125

CET Electric Technology
103
Offset Property Description Format Note
0 RW Alternate Day #1 Date
1)
UINT32 Table 5-59 Date Format
2 RW Alternate Day #1 Daily Profile UINT16 0 to 19
3 RW Alternate Day #2 Date
1)
UINT32 Table 5-59 Date Format
5 RW Alternate Day #2 Daily Profile UINT16 0 to 19
6 RW Alternate Day #3 Date
1)
UINT32 Table 5-59 Date Format
8 RW Alternate Day #3 Daily Profile UINT16 0 to 19
9 RW Alternate Day #4 Date
1)
UINT32 Table 5-59 Date Format
11 RW Alternate Day #4 Daily Profile UINT16 0 to 19
12 RW Alternate Day #5 Date
1)
UINT32 Table 5-59 Date Format
14 RW Alternate Day #5 Daily Profile UINT16 0 to 19
15 RW Alternate Day #6 Date
1)
UINT32 Table 5-59 Date Format
17 RW Alternate Day #6 Daily Profile UINT16 0 to 19
18 RW Alternate Day #7 Date
1)
UINT32
Table 5-59 Date Format
19 RW Alternate Day #7 Daily Profile UINT16 0 to 19
21 RW Alternate Day #8 Date
1)
UINT32
Table 5-59 Date Format
22 RW Alternate Day #8 Daily Profile UINT16 0 to 19
24 RW Alternate Day #9 Date
1)
UINT32
Table 5-59 Date Format
25 RW Alternate Day #9 Daily Profile UINT16 0 to 19
27 RW Alternate Day #10 Date
1)
UINT32 Table 5-59 Date Format
29 RW Alternate Day #10 Daily Profile UINT16 0 to 19
… … Table 5-59 Date Format
… … 0 to 19
240 RW Alternate Day #81 Date
1)
UINT32 Table 5-59 Date Format
162 RW Alternate Day #81 Daily Profile UINT16 0 to 19
243 RW Alternate Day #82 Date
1)
UINT32 Table 5-59 Date Format
245 RW Alternate Day #82 Daily Profile UINT16 0 to 19
246 RW Alternate Day #83 Date
1)
UINT32 Table 5-59 Date Format
248 RW Alternate Day #83 Daily Profile UINT16 0 to 19
249 RW Alternate Day #84 Date
1)
UINT32 Table 5-59 Date Format
251 RW Alternate Day #84 Daily Profile UINT16 0 to 19
252 RW Alternate Day #85 Date
1)
UINT32 Table 5-59 Date Format
254 RW Alternate Day #85 Daily Profile UINT16 0 to 19
255 RW Alternate Day #86 Date UINT32 Table 5-59 Date Format
256 RW Alternate Day #86 Daily Profile UINT16 0 to 19
258 RW Alternate Day #87 Date
1)
UINT32 Table 5-59 Date Format
260 RW Alternate Day #87 Daily Profile UINT16 0 to 19
261 RW Alternate Day #88 Date
1)
UINT32 Table 5-59 Date Format
263 RW Alternate Day #88 Daily Profile UINT16 0 to 19
264 RW Alternate Day #89 Date
1)
UINT32 Table 5-59 Date Format
266 RW Alternate Day #89 Daily Profile UINT16 0 to 19
267 RW Alternate Day #90 Date
1)
UINT32 Table 5-59 Date Format
269 RW Alternate Day #90 Daily Profile UINT16 0 to 19
Table 5-58 Alternate Days Setup
Notes:
1) The following table illustrates the data structure of the Date register:
When the Year and/or Month are set as 0xFF , it means the Alternate Day is repetitive by year and/or month, i.e. the same day of
every year or every month is an Alternate Day.
Byte 3 Byte 2 Byte 1 Byte 0
Reserved Year-2000 (0-37) Month (1-12) Day (1-31)
Table 5-59 Date Format
5.10.8 DO Control
The DO Control registers are implemented as both “Write-Only” Modbus Coil Registers (0XXXXX) and Modbus
Holding Registers (4XXXXX), which can be controlled with the Force Single Coil command (Function Code 0x05)
or the Preset Multiple Hold Registers (Function Code 0x10). The iMeter 6 does not support the Read Coils
command (Function Code 0x01) because DO Control registers are “Write-Only”. The DO Status register 0098
should be read instead to determine the current DO status.
The iMeter 6 adopts the ARM before EXECUTE operation for the remote control of its Digital Outputs if this
function is enabled through the
Arm Before Execute Enable Setup register (6185), which is disabled by default.
Before executing an OPEN or CLOSE command on a Digital Output, it must be “Armed” first. This is achieved by
writing the value 0xFF00 to the appropriate register to “Arm” a particular DO operation. The DO will be “Disarmed”
automatically if an “Execute” command is not received within 15 seconds after it has been “Armed”. If an