Basic programming routine
OMEGA ACTIVE Programming Instructions
22
22
Basic programming routine
The programming of the various authorizations is based on the
following routine:
1.
First, you authorize the SYSTEM-MASTER for your locking
device. You can subsequently also authorize the SYSTEM-
MASTER for further locking devices.
2.
You then authorize one or several PROGRAM-MASTER for
your locking device.
3.
Finally, you authorize the locking media for one or several
locking devices.
During the programming, various acoustic and visual signals
are given.
The SYSTEM-MASTER allows you to authorize up to ten
PROGRAM-MASTERS for your locking system.
The SYSTEM-MASTER cannot be used to authorize locking
media but only to authorize
PROGRAM-MASTERS and optional
Master media (see also page
23).
The locking media for a locking device can only be authorized
with a PROGRAM-MASTER.
One locking medium can also be authorized for several locking
devices.
ATTENTION
If a Master medium is damaged, it may no
longer work.
Make sure that your Master media are not
damaged.
