Cessna Cardinal RG 1974, Руководство пользователя

Страница: 207 / 226

Cessna Aircraft Company
Model 177RG Supplement No.
DP-014-14
Section 9
Supplements Page 9
Revision 0
TIMERS
FLT/ET Button: If elapsed time (ET) is currently displayed the
FLT/ET button will cause the flight timer to be displayed.
Pressing this button again will exchange the two timers in the
display. If the standby frequency is displayed the FLT/ET
button will cause the timer which was last displayed to
reappear in the window.
Flight Timer: The flight timer is displayed in the right hand
window when the FLT message is lit. This timer will count up
to 59 hours, 59 minutes, 59 seconds. When the unit is first
turned on this timer is automatically started at 0. Minutes and
seconds will be displayed until a value of 59 minutes and 59
seconds is reached. On the next count the display will shift to
hours and minutes.
Elapsed Timer: This timer has two modes; Count Up and
Count Down. When power is applied it is in the Count Up
mode starting at 0. As is true with the flight timer, the elapsed
timer will count to 59 hours, 59 minutes, 59 seconds,
displaying minutes and seconds until one hour has elapsed,
then displaying hours and minutes. When in the Count Up
mode the timer may be reset to 0 by pressing the reset button.
(Note: Pressing the reset button will reset the elapsed timer
regardless of what is currently being displayed). To enter the
Count Down mode, the Reset (RST) button is held depressed
for approximately 2 seconds until the ET message begins to
flash (this may be done regardless of current display). While
UNCONTROLLED
COPY
WHEN
DONLOADED