Cessna Cardinal RG 1974, Руководство пользователя

Страница: 107 / 226

Cessna Aircraft Company
Model 177RG Supplement No.
DP-014-24
Section 9
Supplements Page 7
Revision 0
Code Selection:
Code selection is done with eight keys (0 – 7) providing 4,096
active identification codes. Pushing one of these keys begins
the code selection sequence. Digits that are not yet entered
appear as dashes. The new code is activated when the fourth
digit is entered. Pressing the CLR key moves the cursor back
to the previous digit. Pressing the CLR key when the cursor is
on the first digit of the code, or pressing the CRSR key during
code entry, removes the cursor and cancels data entry,
restoring the previous code. You may press the CLR key up to
five seconds after code entry is complete to return the cursor
to the fourth digit. The numbers 8 and 9 are not used for code
entry, only for entering a Count Down time, and for adjusting
contrast and display brightness.
Keys for GTX 330 Functions:
IDENT- Pressing the IDENT key activates the
Special Position Identification (SPI) Pulse for 18
seconds, identifying your transponder return from
others on the air traffic controller’s screen. The
word IDENT will appear in the upper left corner of
the display during this time
VFR- Sets the transponder code to the pre-
programmed VFR code selected during installation
configuration (this is set to 1200 at the factory).
UNCONTROLLED
COPY
WHEN
DONLOADED