background image

Never use an oil/petrol mixture or dirty fuel.

Avoid getting dirt, dust or water in the fuel tank.

After refuelling, tighten the fuel filler cap securely.

Petrol is extremely flammable under certain conditions.

Refuel in a well-ventilated area with the engine stopped.

Do not smoke or allow flames or sparks in the area where the engine is 
refuelled or where petrol is stored.

Do not overfill the fuel tank. After refuelling, make sure that the tank cap is 
closed properly and securely.

Be careful not to spill fuel when refilling. Spilled fuel or fuel vapours may 
ignite. If any fuel is spilled, make sure the area is dry before starting the 
engine.

Avoid repeated or prolonged contact with skin, or the breathing of vapour.

KEEP FUEL OUT OF REACH OF CHILDREN

Check the Air Cleaner

Check the air cleaner element to ensure it is clean and in good working condition.

1. Loosen the cover screw and remove the left side maintenance cover.
2. Press the latch tab on top of the air cleaner body, remove the air cleaner 

cartridge, then check the element.

3. Clean and replace the element if necessary.

Never run the engine without the air cleaner. Rapid engine wear will result from 
airborne contaminants such as dust and dirt being drawn through the carburettor
and into the engine.

It is normal for a little oil to appear under the air filter box if the generator is 
running for a long period of time or if a lot of oil is in the engine. Wipe up excess 
oil after each use and after stopping the generator.

5

Fuel Cap

Open

Air Cleaner 
Cartridge

Air Cleaner
Case

Screws

Access Panel
Screws

Access Panel

Air Cleaner
Element

Содержание CTINV35GENA
























Отзывы: