background image

Transporting the generator

Do not overfill the tank. (There should be NO fuel in the filler neck.)

Do not operate the generator while it is in a vehicle. Take the generator out 
of the vehicle and operate it in a well ventilated area.

Avoid a location exposed to direct sunlight when putting the generator in a
vehicle. If the generator is left in an exposed vehicle for many hours, the 
high temperatures inside the vehicle may cause fuel to vapourise, resulting 
in a possible explosion.

Do not drive on a rough road for an extended period of time with the 
generator on board. If you must travel with the generator on board over 
rough roads, drain all of the fuel from the generator beforehand.

Before storing the unit for an extended period

1. Be sure the storage area is free of excessive humidity and dust.
2. Drain the fuel.

Note

: fuel is extremely flammable and explosive under certain conditions. 

Do not smoke or allow flames or sparks in the area.

3. Completely drain the fuel from the tank. Open the fuel valve, start the 

engine and operate in the idle position until all remaining fuel is gone and 
the engine stops automatically.

4. Discharge the oil.
5. Remove the spark plug and fill the cylinder with 2cc's of fresh oil. Pull the 

start motor 3-4 times to discharge the remaining oil, then reinstall the 
spark plug.

6. Pull the starting cord slowly until the resistance is strong. At this time, the 

piston is moving to the top of the compression stroke and the valves will be
closed.

Muffler Fire Net Service

A dirty muffler will result in high operating noise, and will also affect the engine's 
running quality.   Clean and maintain the fire net in the muffler, to ensure that the 
machine is cooling efficiently.

1. Remove the M6 screws and open the muffler cover.
2. Remove two M4 screws on the fire net.

19

Fuel

Container

Содержание CTINV35GENA
























Отзывы: