v1.5
FPOE-MG-E90
4Pair 90Watt Force Power Multi Gigabit Edge PoE
Adapters
User’s Guide
FCC Certifications
This Equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received; including
interference that may cause undesired operation.
CE Mark Warning
This equipment complies with the requirements relating to electromagnetic compatibility, EN 55022 class A for ITE,
the essential protection requirement of Council Directive 89/336/EEC on the approximation of the laws of the
Member States relating to electromagnetic compatibility.
Company has an on-going policy of upgrading its products and it may be possible that information in this document
is not up-to-date. Please check with your local distributors for the latest information. No part of this document can be
copied or reproduced in any form without written consent from the company.
Trademarks:
All trade names and trademarks are the properties of their respective companies.
Copyright © 2016, All Rights Reserved.
Unpacking Information
Thank you for purchasing our Force Power Edge PoE series products.
Before installation, please check that your package contains the
following items.
Open the shipping cartons of the Edge PoE Adapters and carefully
unpack its contents. The carton should contain the following
items:
1. FPOE-MG PSE (Unit1) x 1
2. FPOE-MG PD (Unit2) x 1
3. Inside diameter 2.1 (PHY) mm DC to DC cable x 1
4. 90W Power Adapter x 1
5. Quick Installation Guide x 1
6. Warranty Card x 1
Hardware Overview
Introduction
The
CERIO FPOE-MG-E90 is a Passive type Multi Gigabit Edge
PoE Adapters.
It provides DC 50-57V over Ethernet cables. Provides a
reliable hardware solution
for demanding of 802.3bt Type3/Class5
45Watt
、
Class6 60Watt and Type4/Class7 72Watt
、
Class8 90Watt
PoE power level PoE/PD powered devices.
Simultaneously transmit
network data and power to the PD equipment through the 4Pair UTP
Ethernet Cable transmission. This Force Power PoE++ Injector series
provides entry-level applications.
Functionality
The
Cerio FPOE-MG-E90
are able to extend PoE to the Edge PoE
equipment (Such as small PoE Switch) to delivery power and data to
PD device through the 4Pair UTP Ethernet cable connecting the PSE
and PD unit. Through RJ45 UTP cable providing both power and data
for where power outlets are not readily available. And without
limited by the distance and location of outlet sockets.
. It provides
802.3bt Type3/Class5 45Watt
、
Class6 60Watt and Type4/Class7
72Watt
、
Class8 90Watt PoE power level for PD device,, such as the
"Supper-speed Multi-Giga WiFi AP " and “Multi-Giga industrial PC”
provide a stable high power PoE++ powered solution.
Highlight Features
Supports 1 / 2.5 / 5Gbps Multi Gigabit Ethernet and
Complying with IEEE 802.3 10Base-T, IEEE 802.3u
100Base-TX, IEEE802.3ab 1000Base-T, IEEE 802.3bz 2.5G
/ 5G BASE-T standard
Provides Force Power PoE++ output ability, and low
cable-loss which can maintain 90Watt PoE power up to
100 meters distance when using CAT 6 or up cabling
PSE Unit supports PSE / PoE function, max PoE output
up to 802.3bt Type4 Class 8 (90Watt) power level
PD Unit supports PD/PoE function, max PD power up to
802.3bt Type4 Class 8 (90Watt) power level when
bundle use with PSE unit
Supports ESD , Electro Static Discharge protection
includes Over Voltage protection and Short Circuit
Protection ensuring device safety
Some additional benefits of Cerio Force Power Multi
Gigabit Edge PoE Adapters include cost saving,
convenience in network planning, and higher reliability.
Supports desktop, wall mounting installation and
multiple units combination easy to use
