77
8.5 Parental Control (This function must be used WISP
mode)
Parental Control allows you to block or allow specific kinds of Internet usage and traffic, such as
Internet access, designated services, and websites.
Please click on
Advance -> Parental Control
and follow the below setting.
Rules :
Control can be managed by a rule. Use the settings on this screen to establish an
access policy.
Comment :
Enter a descriptive name for this rule for identifying purposes.
MAC Address :
Enter MAC address in valid MAC address format(xx:xx:xx:xx:xx:xx) and
click “Add” button to add in the MAC group of each rule. Click “Remove” button can
remove MAC address in the group of each rule. There are 10 MAC address maximum
allowed in each rule.
Local / Destination IP :
Specify local(LAN)/ destination IP addresses range required for
this rule. If you specify local IP addresses range from 192.168.1.1 to 192.168.2.254. The
matches a range of local IP addresses include every single IP address from the first to
the last, so the example above includes everything from 192.168.1.1 to 192.168.2.254.
Protocol :
Select Any or specify protocol(TCP, UDP, ICMP, Content Filter and Application)
from drop-down list. When you select ICMP or Layer 7 Application , the Local(LAN)/
Destination Port can not used.
Содержание 100GX-N
Страница 1: ...1 CERIO Corporation 100GX N extreme High Power 11n 150Mbps In Wall PoE Access Point User s Manual ...
Страница 16: ...16 The 100GX N System screen The 100GX N system login default As follows User Name root Password default ...
Страница 61: ...61 Please refer 3 5 Configure Wireless Advanced Setup Explanation ...
