Cerio 100GX-N, Руководство пользователя

Страница: 45 / 95

45
5.2 External Network Connection ( Network Requirement )
It can be used as an Client Bridge or Repeater AP to receive wireless signal over last mile
applications, helping WISPs deliver wireless broadband Internet service to new residential and
business customers. In this mode, 100GX-N is enabled with DHCP Server functions. The wired
clients of 100GX-N are in the same subnet from Main Base Station and it accepts wireless
connections from client devices.
5.3 Configure 100GX-N LAN IP Address
Here are the instructions for how to setup the local IP Address and Netmask. Please click on
System -> LAN and follow the below setting.
※
Please refer 3.3 Configure 100GX-N LAN IP Address LAN IP Setting.
When the 100GX-N configured as an Access Point and Client Station simultaneously,
the Wireless General and Advanced Setup also used simultaneously. But the
Security Type can be different. In the other word, the channel or other settings will be
the same between 100GX-N to Main Base Station and wireless client to 100GX-N,
but security type can be different.