Installation Guide for FibeAir IP-20F
Page 34 of 63
Ceragon Proprietary and Confidential
FibeAir IP-20F utilizes a dual-feed power interface, which can be connected to two
separate power supplies for power redundancy. A power cable connector is included
with the IP-20F unit.
The following power cables are available for use with an IP-20F unit:
Ceragon Part Number
Marketing Model
Marketing Description
WA-0567-0
CBL-PWR-OE-OE-16A-2.2m
Power cable Open-end/Open-end, 16A, 2.2m
WA-0568-0
CBL-PWR-OE-OE-16A-5m
Power cable Open-end/Open-end, 16A, 5m
To connect a power cable to the IP-20F:
1 Expose the wires of the power cable.
2 Loosen the top two screws on the connector.
3 Verify that the wiring is according to the correct polarity.
Figure 8: Correct Wiring of Power Connector
