Installation Guide for FibeAir IP-20C-HP
Page 13 of 204
Ceragon Proprietary and Confidential
2.
FibeAir IP-20C-HP Overview
FibeAir IP-20C-HP combines high TX power of up to 35 dBm with MultiCore radio
technology, QPSK to 2048 QAM modulation, and line-of-sight (LoS) 4x4 MIMO in a
compact, all-outdoor design.
IP-20C-HP is easily and quickly deployable compared with fiber, enabling operators to
achieve faster time to new revenue streams, lower total cost of ownership, and long-
term peace of mind.
IP-20C-
HP’s MultiCore architecture enables operators to start with a single core with the
option of enabling the second core remotely when network capacity requirements
increase.
The 4x4 LoS MIMO feature adds yet another element of scalability, enabling operators
to quadruple capability with the addition of a single IP-20C-HP unit and antenna at each
end of the link while utilizing the same exact frequency channel with no network
replanning.
IP-20C-HP can be used with wide diplexer-based branching, enabling direct mount
installation. Diplexers can be used for direct mount configurations of up to 4+0.
IP-20C-HP can also be used with channel filter-based branching, enabling configurations
of up to 8+0 per polarization in remote mount and all-indoor configurations.
To maximize operational flexibility, both diplexers and channel filters are provided
separately for the radio units, enabling the diplexers or filters to be changed in the field
with minimal downtime and no risk of impairing the unit’s sealing.
To maximize operational flexibility, both diplexer covers and outdoor circulator units
(OCUs) are provided separately from the radio units, enabling the diplexer covers or
OCUs to be changed in the field with minimal downtime and no risk of impairing the
RF
U’s sealing.
