Installation Guide for FibeAir IP-20C-HP
Page 12 of 204
Ceragon Proprietary and Confidential
Beachten Sie beim Arbeiten mit IP-20C-HP das folgende Stromschlag- und
Gefahrenrisiko: Durch Abtrennen einer Stromquelle wird nur ein
Stromversorgungsmodul abgetrennt. Um die Einheit vollständig zu isolieren,
trennen Sie alle Stromversorgungen ab.
Maschinenlärminformations-Verordnung - 3. GPSGV, der höchste Schalldruckpegel
beträgt 70 dB(A) oder weniger gemäß EN ISO 7779.
1.3
Pre-Installation Instructions
1.3.1
Packing
The equipment should be packed and sealed in moisture absorbing bags.
1.3.2
Transportation and Storage
The equipment cases are prepared for shipment by air, truck, railway and sea, suitable
for handling by forklift trucks and slings. The cargo must be kept dry during
transportation, in accordance with ETS 300 019-1-2, Class 2.3. For sea-transport, deck-
side shipment is not permitted. Carrier-owned cargo containers should be used.
It is recommended that the equipment be transported to the installation site in its
original packing case.
If intermediate storage is required, the packed equipment must be stored in a dry and cool
environment, and out of direct sunlight, in accordance with ETS 300 019-1-1, Class 1.2.
1.3.3
Unpacking
The equipment is packed in sealed plastic bags and moisture absorbing bags are
inserted. Any separate sensitive product, i.e. printed boards, are packed in anti-static
handling bags. The equipment is further packed in special designed cases.
Marking is done according to standard practice unless otherwise specified by customers.
The following details should be marked:
•
Customers address
•
Contract No
•
Site name (if known)
•
Case No
1.3.4
Inspection
Check the packing lists and ensure that correct parts numbers quantities of goods have
arrived. Inspect for any damage on the cases and equipment. Report any damage or
discrepancy to a Ceragon representative, by e-mail or fax.
