User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 613 of 825
Ceragon Proprietary and Confidential
Table 177: MPLS EXP Bit Classification Table Modification CLI Parameters
Parameter
Input Type
Permitted Values
Description
mpls-exp
Number
0
–
7
The MPLS EXP bit to be mapped.
cos
Number
0
–
7
The CoS assigned to frames with the
designated MPLS EXP bit value.
color
Variable
green
yellow
The Color assigned to frames with the
designated MPLS EXP bit value.
The following command maps frames with MPLS EXP bit value of 4 to CoS 4 and
Yellow color:
root> ethernet qos mpls-exp-bits-mapping-tbl set mpls-exp 4
cos 4 color yellow
18.1.7
Configuring a Default CoS (CLI)
You can define a default CoS value for frames passing through the interface. This
value can be overwritten on the service point and service level. The Color is
assumed to be Green.
To define a default CoS value for an interface, go to interface view for the
interface and enter the following command:
eth type eth [x/x]>classification set default-cos <default-cos>
To display the default CoS value for an interface, go to interface view for the
interface and enter the following command:
eth type eth [x/x]>classification show default-cos
Table 178: Default CoS CLI Parameters
Paramete
r
Input
Type
Permitted Values Description
default-
cos
Number
0
–
7
Enter the default CoS value for frames passing
through the interface. This value can be
overwritten on the service point and service level.
The following command sets the default CoS for GbE 1 as 7:
eth type eth [1/1]>classification set default-cos 7
18.1.8
Configuring Ingress Path Classification on a Service Point (CLI)
For instruction on configuring ingress path classification on a service point, see
CoS Preservation and Modification on a Service Point (CLI)
18.1.9
Configuring Ingress Path Classification on a Service (CLI)
For instruction on configuring ingress path classification on a service, see
