Maintenance
Limited Warranty
Operating Instructions (continued)
To Lower a Stationary Load:
1. The jack must have a load of 150 lbs. or greater before it can be lowered
or else the lifting mechanism will slide down the steel bar frame to the
base plate.
2. Position jack under the load and raise the load (as described in “To Raise
a Stationary Load”) in order to remove blocks holding the load up.
3. Place handle in the vertical position clipped against the steel bar frame
before attempting to lower load.
4. Shift the reversing latch to the lower position. (see Fig. 2)
5. While grasping the handle with both hands, carefully move the handle up
and down. The load will be lowered on each up stroke of the handle.
Maintain controlled grip of handle through the entire handle stroke.
Using the Jack as a Winch: (Do not exceed the maximum load of 4,660 lbs.)
1. Always use chains or tow straps that have a greater working strength/
capacity than the jack.
2. Loosen the top clamp bolt and rotate clamp so that it is in-line with the
steel bar frame. (see Fig. 3) Retighten bolt to 64 ft-lbs.
3. Attach one end of chain/tow strap securely to the load. Attach other end
securely to the top clamp opening. It is recommended to use a shackle
(not included) for attachment.
4. Attach another chain/tow strap securely to a fixed object. Attach other end securely to the lower clamp.
5. Operate jack as if it was being used to raise a load.
Using the Jack as a Clamp: (Do not exceed the maximum load of 750 lbs.)
1. The top clamp must be positioned perpendicular to the steel bar frame. (see Fig. 4)
2. The top clamp can be moved to any position along the steel bar frame. (see Fig. 4) Remove top clamp
bolt and reposition top clamp to new hole position on steel bar frame. Retighten bolt to 64 ft-lbs.
3. Operate the jack as if it was being used to raise a load, clamping material between the top and lower
clamps.
1. Never perform maintenance on jack while it is under load.
2. The jack can be cleaned with water and a mild detergent if needed. Dry and lubricate immediately after
cleaning.
3. Lubricate the jack with a light penetrating oil, or a Teflon or silicon spray at locations shown. (see Fig. 5)
These locations include both climbing pins and associated springs(1-4), the shear pin(5), the handle pin(6),
and front and back edges(7-8) of the steel bar frame.
4. Binding of the climbing pins may be due to dirt, corrosion, or a worn or bent steel bar frame. If binding
occurs, clean and lubricate jack. Test jack by raising without a load. If binding continues, do not use jack.
1
6
7
8
2
5
3
4
Limited Warranty.
Cequent Trailer Products, Inc. (“We” or “Us”) warrants to the original consumer purchaser only (“You”) that the product
purchased will be free from material defects in both material and workmanship, normal wear and tear excepted, for a period of
five years for
Bulldog® and Fulton® products and one year for the Pro-Series® products
. The foregoing warranty is valid only if the installation and use
of the product is in accordance with product instructions. There are no other warranties, express or implied, including the warranty of
merchantability or fitness for a particular purpose. If the product does not comply with the applicable limited year warranty, Your sole and
exclusive remedy is that We will replace the product without charge to You and within a reasonable time or, at our option, refund the purchase
price. This limited warranty is not transferable.
Limitations on the Warranty.
This limited warranty does not cover: (a) normal wear and tear; (b) damage through abuse, neglect, misuse, or as a
result of any accident or in any other manner; (c) damage from misapplication, overloading, or improper installation; (d) improper maintenance
and repair; and (e) product alteration in any manner by anyone other than Us, with the sole exception of alterations made pursuant to product
instructions and in a workmanlike manner.
Obligations of Purchaser.
For your warranty to apply, You must retain Your product purchase receipt to verify date of purchase and that You are
the original consumer purchaser. To make a warranty claim, contact Us at 47774 Anchor Ct. W., Plymouth, MI 48170, 1-800-521-0510,
identify the product by make and model number, and follow the claim instructions that will be provided. The product and the purchase receipt
must be provided to Us in order to process Your warranty claim. Any returned product that is replaced or refunded by Us becomes our
property. You will be responsible for return shipping costs.
Remedy Limits.
Repair or replacement is Your sole remedy under this limited warranty or any other warranty related to the product. We shall not
be liable for service or labor charges incurred in removing or replacing a product or any incidental or consequential damages of any kind.
Assumption of Risk.
You acknowledge and agree that any use of the product for any purpose other than the specified use(s) stated in the product
instructions is at Your own risk.
Governing Law.
This limited warranty gives You specific legal rights, and You also may have other rights which vary from state to state. This
limited warranty is governed by the laws of the State of Michigan, without regard to rules pertaining to conflicts of law. The state courts located
in Oakland County, Michigan shall have exclusive jurisdiction for any disputes relating to this warranty.
Top clamp
Attach shackle here
Fig. 3
Climbing pins
Reversing latch
(lower position)
Plymouth, MI 48170 USA
800/521-0510
www.cequentgroup.com
Fig. 2
Fig. 4
Fig. 5
Reversing latch
(raise position)
