Cepton Sora 200, Руководство пользователя

Страница: 8 / 25

Getting Started
Website : http://www.cepton.com/
Developers : https://github.com/ceptontech/
Mounting the Sensor
The sensor vibrates during normal operation. If not properly mechanically isolated, it can cause
excessive audible noise or interference to other sensors that are sensitive to vibration. We
recommend mounting the sensor using vibration isolating rubber or foam. If using the sensor on a
tripod, ensure that the tripod is rigid and does not vibrate excessively when the sensor is powered on.
Connecting the Sensor
Connect the sensor's power cable (barrel plug) to the provided 12V power supply. Connect the
sensor's Ethernet cable to the host computer (we recommend using a USB -> Ethernet adapter).
The sensor IP address is of the form
192.168.*.*
, and it sends UDP broadcast packets on port
8808
. The sensor will start sending packets as soon as the power is connected.
On Ubuntu, it is necessary to assign a static IP address to the host computer's Ethernet interface (e.g.
IP=
19.168.0.2
, Netmask=
255.255.0.0
). This can be done through the NetworkManager GUI.
Page 8 of 25