CEP Terminals GT910 G, Руководство пользователя

Страница: 15 / 28

15
3 Safety and Product Care
This device has been designed in accordance with industrial standards, manufactured with utmost care
using high-quality materials, and thoroughly tested. Nevertheless, its use may constitute a risk to persons
or cause material damage.
The following safety instructions must be followed to ensure the safety of users and of the device.
NOTICE
If these instructions are ignored, Telic AG will not assume responsibility for any damages that are
incurred. Telic AG may refuse warranty claims where evidence of product misuse is found.
Please read the information in this section and the information in Section 6 Installation of the modem before
starting your integration work!
3.1 Audience and Intended Use
This terminal product is targeted towards system integrators who need to add a wireless communications
link to their M2M / IoT application to capture data from the application as well as to remotely control
that application. Any other use is not intended.
3.2 Safety instructions
PLEASE READ THESE SAFETY INSTRUCTIONS AND KEEP A COPY OF THEM.
The GT910 G terminal contains highly integrated components which can be damaged by electrostatic
discharge if the user would open the housing.
Therefore, only touch the GT910 G terminal on the housing or connectors and avoid
touching the components on the board.
 Always ensure that the use of the modem is permitted. The modem may present a hazard if used in the
proximity of personal medical electronic devices. As a rule, the modem must not be used in hospitals,
airports or planes.
 Never use the modem at a gas station, refueling point, blasting area or in any other environment where
explosives may be present.
 Operating the modem close to other electronic devices, such as antennas, television sets, and radios may
cause electromagnetic interference.
 This product is intended to be used with the antenna or other radiating element at least 20 cm away from
any part of the human body. In applications where this rule cannot be applied, the application designer is
responsible for providing the SAR measurement test report and declaration.
 You are responsible for observing your country's safety standards, and where applicable, the relevant wiring
rules.