Century VGreen Скачать руководство пользователя страница 1

1

PART

PART 

NUMBER

QTY

IMAGE

Terminal Box 

Cover Assembly

2513409-001 

(Grey)

2513409-002 

(Black)

1

Plug

2514059-001

4

Screw Driver

2517831-001

1

PART

PART 

NUMBER

QTY

IMAGE

Autolmation

Adapter

2517369-001 

1

Digital Input 

Cable

2517463-001

4

Lead Cable

2517465-001 25 FT

RS-485 

Connector

2511130-001

1

Conduit Fitting

2017587-002

1

TABLE OF CONTENTS
1.0   KIT CONTENTS ....................................................................................................... 1
2.0   INTRODUCTION ...................................................................................................... 2
3.0   OVERVIEW .............................................................................................................. 2
4.0  CONNECTING TO A VGREEN  MOTOR ................................................................... 2
5.0  CONNECTING TO AN ALTERNATE POWER SOURCE ........................................... 5
6.0  CONNECTING TO AN AUTOMATION SYSTEM ..................................................... 5

6.1  Using automation system output connectors .................................................. 5
6.2  Using automation system relays ........................................................................ 5

6.2.1  Connecting to input side of relays ............................................................... 5
6.2.2  Connecting to output side of relays ............................................................ 6

6.2.2.1  Output signal powered by automation adapter .................................. 6
6.2.2.2  Output signal powered by alternate power supply ............................. 6

7.0  OPERATING A VGREEN

®

 MOTOR AUTOMATION ADAPTER ................................ 6

7.1  Adjusting motor speed ......................................................................................... 6

8.0  FAULT STATUS ........................................................................................................ 7
9.0  TROUBLESHOOTING GUIDE ................................................................................. 7
10.0 SPECIFICATIONS ..................................................................................................... 7

F O R M

VGreen

®

 Motor Automation Adapter Kit

Installation Manual and User’s Guide 

For use with Century

®

 VGreen variable speed motors

C0048E

Revised

December 2018

Regal Beloit America, Inc.

1325 Heil Quaker Blvd.

LaVergne, TN 37086

Customer Service: 1-800-262-6484

www.RegalBeloit.com

•  Read and follow all instructions carefully.
•  Disconnect and lock out power before installation and maintenance.  Working on or near energized equipment could result in severe 

injury or death.

1.0   KIT CONTENTS

Содержание VGreen








Отзывы: