Centurion Clip User Manual
VK-Mobile
VK Mobile Unlock
Models:
VK207, VK207i, VK530, VK570
LED Sequence:
Blinking, Blinking, On,
Off
Phone:
Powered On
Connector
PS2, VK207 connecter (looks like Samsung A300)
1. Switch the Superclip on and select VK207i
2. Ensure the Target phone is Powered On with foreign SIM in (one the phone does not accept).
3. Connect to the Superclip.
4. Press the “Enter” button.
5. Clip will flash briefly , Phone Unlocked.
6. Restart
phone
Tips & Tricks
If LEDs 1 & 4 blink while LED 2 stays on, this indicates communication error, open up
the VK connector if Pins 1 and 2 are soldered together then cut pin 2.
The following are not available in the latest update and you must install
the stated firmware on your clip to use
Benq E61
Removed from V8.00 Centurion, you must install firmware version 7.90 in order to use this
Models:
Benq-Siemens E61
Clip Firmware
V7.80 or V7.90
LED Sequence:
Blink, Blink, Blink,
Off
Phone:
Powered Off
Connector
PS2, 02-X2, M300 type
7. Switch on the Superclip and select
BenQ
8. Connect up the phone. (No SIM, Powered OFF)
9. Press “Enter” button.
10. Press “Power” button and hold on phone.
11. Wait for Superclip’s LEDs to return to mode indication.
12. Phone unlocked.
http://www.centurionclip.com
Page. 22