manualshive.com logo in svg

Centurion SMART GUARD air, Руководство по эксплуатации, Страница: 25 / 32

Поделиться
Скачать
Centurion SMART GUARD air Скачать руководство пользователя страница 25

21

Both the master code and the system parameters (timers, 
alarm functions etc.) can be reset to factory defaults. This is 
useful when the master code has been forgotten, or the system 
parameters are in an unknown state.

Defaulting the Master Code:

Remove power. Re-apply power while holding the  1  key down 
for 2 seconds. A beep will then follow, indicating that the master 
code has been reset to 1234.

Defaulting the System Parameters:

Remove power. Re-apply power while holding the  2  &  3  keys 
down for 2 seconds. A beep will then follow, indicating that the 
system parameters have been reset to the following factory 
defaults:

Output timers:

1s pulse

Wrong codes:

3

Wrong code reset:

60s

Wipeout timer:

15s

Security parameters:

All OFF

NOTE:

!

Defaulting is not possible if the anti-default option has been 
set (see page 16). In this case, if the master code has been 
lost, the system must be restored from a backup to reset the 
master code to 1234.

Defaulting the unit

Содержание SMART GUARD air

































Отзывы:

Нет отзывов