Central Pneumatic Contractor 97520, Руководство по установке и эксплуатации

Страница: 7 / 24

SKU 98464 For technical questions, please call 1-800-444-3353. Page 7
FuNCTIONAL dESCRIPTION
Specifications for 97526 Air Pin
Nailer
Air Pressure Range 60-100 PSI
Maximum Air Pressure 120 PSI
Air Inlet
1/4” -18 NPT
Air Consumption 5.5 CFM @ 90 PSI
Fastener Type/Gauge
Headless Pin Nails
23 Gauge
Five Pin Length
Settings
1/2”, 5/8”, 3/4”, 7/8”, 1”
Safety Mechanism
Type
No Contact Safety
Specifications for 97520 Air Brad
Nailer
Air Pressure Range 60-100 PSI
Maximum Air Pressure 120 PSI
Air Inlet
1/4” -18 NPT
Air Consumption 5 ~ 6 SCFM @ 90 PSI
Fastener Type/Gauge 16 Gauge
Brad Size Capacity 3/4” ~ 2” L
Safety Mechanism
Type
Full Sequential
Specifications for 97524 Air Brad
Nailer/Stapler
Air Pressure Range 60-100 PSI
Maximum Air Pressure 100 PSI
Air Inlet
1/4” -18 NPT
Air Consumption 4 ~ 6 SCFM @ 90 PSI
Magazine Capacity 100 Nails or 80 Staples
Brad Nail Size
.039 - .042” Shank (18
Gauge); 5/8” - 2” L
Staple Size
1/4” Crown, .039 - .042”
Shank (18 Gauge), 1/2”
- 1-1/2” L
Safety Mechanism
Type
Single Sequential
INITIAL TOOL SET uP/
ASSEmBLY
Read the ENTIRE ImPORTANT
SAFETY INFORmATION
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
Note: For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.
unpacking
When unpacking, check to make sure
that the item is intact and undamaged. If
any parts are missing or broken, please
call Harbor Freight Tools at the number
shown throughout the manual as soon as
possible.
This air tool may be shipped with a •
protective plug covering the air inlet.
Remove this plug before set up.
Air Supply
TO PREVENT
ExPLOSION:
use only clean, dry, regulated,
compressed air to power this
tool. do not use oxygen,
carbon dioxide, combustible
gases, or any other bottled
gas as a power source for this
tool.