Page 8
For technical questions, please call 1-888-866-5797.
Item 63042
SAFETy
OpERA
TION
MAINTENANcE
SETUp
connecting Attachments
Floor Brush - Hard Floors, carpets and Rugs
NOTIcE:
Consult floor/carpet manufacturer′s instructions before steam cleaning.
Do not use on painted surfaces. Do not use on unsealed, polished or waxed surfaces.
1. Floor Brush is packed separately from its
Handle. Insert Handle into Floor Brush as
shown below. Push all the way in, then
twist Handle up to its normal position.
Handle
2. Attach one or both Extension Tubes to Nozzle:
Line up hole in Extension Tube with lock
button on Nozzle and push together until
Extension Tube clicks into place.
Nozzle
Extension
Tube
Hole
Lock
Button
3.
carpets and Rugs:
Attach Floor
Brush to Extension Tube.
Line up hole in Floor Brush with lock button
on Extension Tube and push together
until Floor Brush clicks into place.
Floor
Brush
4.
Hard Floors:
Attach Floor Brush
with Cloth to Extension Tube.
To attach Cloth, lay Floor Brush over Cloth,
push down on clamps, tuck the ends of Cloth
under clamps, then release clamps.
Floor Brush
with cloth
clamp
cAUTION!
To prevent burn injury, wait until cloth
has cooled before removing from Floor Brush.
Note:
Floor Brush may be stored on
holder located on back of Unit.
