background image

Page 12

For technical questions, please call 1-888-866-5797.

Item 63042 

        

SAFET

y

Op
ERA
TION

M

AINTENAN

c

E

SETU
p

Troubleshooting

problem

possible causes

Likely Solutions

Unit will not heat 

up.  Power light 

does not come on.

1.  Cord not connected.
2.  No power at outlet. 

 

 

3.  Unit’s thermal overload tripped. 

4.  Internal damage or wear.  

1.  Check that cord is plugged in.
2.  Check power at outlet.  If outlet is unpowered, 

turn off Unit and check circuit breaker.  

If breaker is tripped, make sure circuit is right 

capacity for Unit and circuit has no other loads.

3.  Unplug Unit and allow to cool for 20 minutes.  

After cooled, plug in Unit and continue use.

4.  Have technician service Unit.

Steam output 

is weak.

1.  Water level is low.
2.  Mineral build up in tank.

1.  Refill according to 

Note:  Tank will need to 

be refilled when steam flow decreases. 

 

See Filling Tank on page 6.

2.  Descale tank according to 

cleaning, 

Maintenance, and Lubrication on page 11

.

Excessive water 

in steam.

1.  Tank overfilled. 

2.  Unit not heated fully.

1.  Fill tank according to 

Filling Tank on page 6.

   

Only use included measuring cup to fill tank. 

2.  Wait until Steam Light goes out.

  Follow all safety precautions whenever diagnosing or servicing the appliance.   

Disconnect power supply before service.

Содержание 63042

















Отзывы: