CentoLight ZEPHIRO HAZE 1000ST, Руководство пользователя

Страница: 12 / 36

12 12
Zephiro Haze 1000ST User Manual
Eng
Following the wiring correspondence between 3-Pin and 5-Pin plug and socket
standards
5-Pins XLR (plug)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
3-Pins XLR (socket)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
5-Pins XLR (socket)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
3-Pins XLR (plug)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
4.5. Wireless Remote Control
Zephiro Haze 1000ST features a wireless controller (n.13). In case of multiple units,
one transmitter can work with more machines; no paring procedure is needed.
There are 2 buttons on the wireless remote transmitter as below:
A
B
DIGITAL REMOTE
CONTROLLER
A Button : Press this button to output haze. The emission will con-
tinue until you press B button. Red LED on top of A button will lit.
B Button : Press this button to stop the haze emission.
1) Battery Replacement
If the remote control cannot work (red LED does not lit and machine does not oper-
ates), please check whether battery is low and need to be replaced.
To change the battery, remove the cover on the back of the remote control and
replace the old battery with one of the same type (23A - 12V).