CentoLight PORTRAIT Tondo Set, Руководство пользователя

Страница: 11 / 44

11 11
PORTRAIT TONDO Set User Manual
Eng
3.7. Fixture Placement
The PORTRAIT TONDO can be mounted in two ways.
1) Stacked Use
The PAR can sit on even and solid floor. It has a dual C-bracket to adjust tilt orienta-
tion.
Make sure that the fixture is always placed on even and strong enough surface, and
keep it 0.5m away from projection objects.
2) Rigging
The C-brackets of PORTRAIT TONDO allow the user to hang the fixture on a truss
or other type of hanging structure. Please check the light accessory lineup on www.
centolight.com for further details. Users also need to make sure the crossbar is sta-
ble or not moving, and can support a weight of 40 kg (fixture net weight is 4kg).
Pay attention to safety! Please respectively consider the EN 60598-2-17 and the
national standard during the installation.
y
The installation of the fixture has to be built and constructed in a way that it
can hold 10 times the weight for 1 hour without any harming demolition. The
installation must always be secured with a secondary safety attachment, e.g. an
appropriate catch net. This secondary safety attachment must be constructed in
a way that no part of the installation can fall down if the main attachment fails.
y
When rigging, unmount or servicing the fixture, staying in the area below the
installation place, on bridges, under high working places and other endangered
areas is forbidden. The operator has to make sure that the safety measure and
the machine’s technical installation is approved by an expert before taking into
operation for the first time and after changes before taking into operation an-
ther time. He has also to make sure that an expert approves safety measure and
the machine’s technical installation once a years.
WARNING: The fixture should be installed outside areas where persons may
walk by or be seated.
IMPORTANT: Overhead rigging requires extensive experience, including (but not
limited to) calculating working load limits, installation material being used, and
periodic safety inspection of all installation material and the projector. If you
lack these qualifications, do not attempt the installation yourself, but instead
use a professional structural rigger. Improper installation can result in bodily
injury or property loss.