CentoLight PORTRAIT Q-Air Set, Руководство пользователя

Страница: 9 / 60

9 9
PORTRAIT Q-AIR Set User Manual
Eng
y
Menu: Press MENU button until the desired option appears
y
Enter: Enter the current menu or confirm the current function value
y
Up: Scroll “UP” through the menu list to increase the value of current function
y
Down: Scroll “DOWN” through the menu list to decrease value of current function
3.5. Power Input/Output Connection
y
Always make sure that the voltage of the outlet you are connecting the product
to is within the range stated in paragraph “10 - Specifications” on page 28
or rear panel of the product (AC110V-240V 50/60Hz).
y
Make sure the power cord is not crimped or damaged. Never connect this prod-
uct to a dimmer pack or rheostat.
y
Never disconnect the product from power cord by pulling or tugging on the cord.
y
To avoid electric shock, all fixtures must be connected to circuits with a suitable
ground and circuit breaker.
y
Wire correspondence is as follows:
Cable (EU) Pin International
Brown Live L
Blue Neutral N
Yellow/Green Earth
Earth must be connected! Always pay attention to safety! Before taking into
operation for the first time, the installation has to be approved by an expert.
1) PAR Power Output Plug
This fixture is equipped with an output power connector to be used as power mains
source in case of daisy-chain connection up to a maximum of 10 fixtures .