CentoLight PORTRAIT Q-Air Set, Руководство пользователя

Страница: 24 / 60

24 24
PORTRAIT Q-AIR Set User Manual
Eng
exit current sub-menu page by continu-
ing pressing MENU button.
To control the fixture with this IR remote
controller, make sure to point the control-
ler directly to the IR receiving sensors
on the product. Make sure there are no
objects between the controller and the
fixture.
1. Sets fixture ON
2. Sets fixture into blackout (LED off).
3. Adjusts auto, strobe & fade speed,
sound sensitivity etc.
Sets the fixture to static color RED GREEN
BLUE WHITE
Preset colors.
Runs auto mode. Use buttons to adjust auto speeds.
Runs strobe programs. Use buttons to adjust strobe speeds.
Runs fade programs. Use buttons to adjust fading speeds.
Runs sound programs. Use buttons to adjust microphone sensitivities.
Static Color Selection. Combined with buttons allows to run 15 static colors
in “Color” menu (read the table in paragraph “8. PRODUCT SETUP” on page 16).
The fixture has RGBW quad color led, these two buttons have no function.
Note: The remote control uses a CR2025 3Volt Lithium battery. Be sure the bat-
tery is correctly installed, and make sure it is charged.
9 - M
aInTenanCe
9.1. General Maintenance
The operator has to make sure that the safety-related and machine-technical instal-
lations have to be periodically inspected by an expert, according to local legislation.