Cellularline Interphone U-COM 16, Руководство пользователя

Страница: 20 / 23

20
11. FUNCTION PRIORITY AND FIRMWARE
UPGRADES
11.1 Function Priority
The headset prioritizes connected devices in the following order:
1. (Highest) Mobile phone
2. Voice command mode
3. Mesh Intercom/ Bluetooth
®
Intercom
4. Music sharing via Bluetooth
®
stereo
5. FM radio
6. Bluetooth
®
stereo music
A lower-priority function gets interrupted by a higher-priority function. For
example, stereo music will be interrupted by an Intercom Conversation; an
Intercom Conversation will be interrupted by an incoming mobile phone call.
11.2 Firmware Upgrades
The headset supports firmware upgrades. Using the Device Manager
utility (availble for PC and MAC on www.interphone.com) you can upgrade
firmware.
The USB Power & Data Cable (USB-C) must be connected to your computer,
then start Sena Device Manager on computer and follow instructions step by
step.
Interphone Unite APP can check the firmware version present on the
headset and inform you in case of a newer available firmware, but APP can't
flash the new firmware to headset.
12. CONFIGURATION SETTING
12.1 Headset Configuration Setting
With U-COM 16 on, press and hold central button for 10 seconds, to enter
settings menu. Don't release the button until the led light is blue.
To navigate through the settings, press once the MUSIC button or the
PHONE button.
1. Phone pairing
2. Second Mobile Phone Pairing
3. Phone selective pairing (pair a device with HFP profile only)
4. Media selective pairing (pair a device with the A2DP profile only)
5. GPS pairing
To confirm the following configuration menu options, press the CENTER
button once.
6. Delete all pairings
7. Anycom pairing
8. Factory reset
9. Exit
12.1.1 Delete all pairings
Delete all Bluetooth
®
pairings stored in the device.